Acer 240 User Manual page 56

48
The table below describes the parameters in the screen.
Parameter Description
System Sets the system time.
Time
Format: HH:MM:SS (hour:minute:second)
System Sets the system date.
Date
Format: MMM DD YYYY (month day year)
Boot Sets the display device when the computer starts up.
Display
Options: Both or Auto
QuickBoot Quick Boot allows your computer to skip certain tests at start-
Mode up to speed-up the boot process.
Options: Enabled or Disabled
Boot-time Shows the logo during boot up.
Diagnostic
Options: Enabled or Disabled
Screen
Boot on When enabled, allows your computer to boot up via the
LAN network
Options: Enabled or Disabled
Hotkey Enables or disables a beep when a hotkey is pressed.
Beep
Options: Enabled or Disabled
Auto Dim When enabled, the system will automatically dim the LCD
screen when system is running on battery power.
Options: Enabled or Disabled
F12 Multi- When enabled, the "Fn-F12 for multi-boot" message will be
Boot displayed during POST.
Options: Enabled or Disabled
2 Customizing my computer