Table of Contents
Advertisement
Creating Dialing Instructions
The service provider of your Calling Card account requires a specific
sequence of numbers to be dialed before your call is completed.
Dialing sequence sets up the needed format.
To create dialing instructions:
1.
From the standby mode, press Menu, scroll to Settings, and
press Select.
- or -
From Step 6 above, skip to Step 5 below.
2.
Scroll to Call settings, press Select, scroll to Calling card, and
press Select.
3.
Enter your security code and press OK.
4.
Scroll to Card A (or another card), press Options, scroll to Edit,
and press OK.
5.
Scroll to Dialing sequence and press Select.
6.
Scroll to Access no. + phone no. + card no. (or other dialing
sequence required by that account provider) and press Select.
7.
Enter the first required number and press OK.
8.
Enter the next required number and press OK to save. (The
phone number, phone no., is selected when you actually make a
call using this Calling Card account.)
Placing a Calling Card Call
After setting up the Calling Card and its dialing instructions, you are
ready to place a phone call using your Calling Card.
To use your calling card account:
1.
From the Calling card menu, scroll to select a calling card and
press Options.
2.
Scroll to Select and press OK. (A Card ready for use message is
displayed.)
3.
Enter the phone number you want to call.
4.
Press and hold
displayed.
5.
When you hear a tone or system message, press OK.
Section 2K: Additional Features
for a few seconds until Card call... is
127
Advertisement
Table of Contents
