Is Drying At All Times; Too Much Noise In Drying - Haier HLTD500AGW Service Manual

SERVICE MANUL
Model No.HLTD500AGW
9-2-5. Use the "AUTOMATIC CYCLES" program
dryer is drying at all times
Check if the terminal of the humidity
sensor is ok: check if between two
metallic humiditty sensor piece have
some conductor .
N
Check if the wire connecting of the
humidity sensor and PCB is good.
Check if the wire unit or PCB is good .

9-2-6. Too much noise in drying

Troubleshooting:
Switch on the power, push down the
start button.
Search the root of the noise.
If the noise from the tensive arm unit or
the belt .
N
Check if some screw become flexible .
N
Check if is there grating between the
impeller and the worm shell.
N
Check if the drum touch something.
Check if the frictional slice and the wool
felt is well.
N
the clothes is very dry but the
Y
N
N
Y
Y
Y
Y
Y
- 32 -
Issue
Rev.
Take out the conductor.
Repair or replace the broken part.
Replace the broken part.
Reinstall the tensive arm
unit or replace the tensive
arm unit and the belt.
Fasten the screw
Replace the worm shell
Reinstall them and let the
drum can 't touch anything
Replace the broken part.