Packet Data Access Points - Nokia N85 N85 User Manual

To add access points to an access point group, select
the group and Options
an existing access point from another group, select the
group, an existing access point, and
Organise Copy to other
>
To change the priority order of access points within a
group, select an access point and
Organise Change priority.
>

Packet data access points

Press , and select Tools
Connection Destinations
>
and follow the instructions on the screen. Or, open one
of the access point groups, select an access point
marked with , and select Edit.
Follow the instructions from your service provider.
Select from the following:
Access point name — You obtain the access point
●
name from your service provider.
User name — The user name may be needed to
●
make a data connection, and is usually provided by
the service provider.
Prompt password — If you must enter the
●
password every time you log in to a server, or if you
New access point. To copy
>
Options
>
dest..
Options
>
Settings
> >
New access point,
>
do not want to save your password in the device,
select Yes.
Password — A password may be needed to make
●
a data connection and is usually provided by the
service provider.
Authentication — Select
●
your password encrypted or
password encrypted when possible.
Homepage — Depending on the access point you
●
are setting up, enter the web address or the address
of the multimedia message centre.
Select Options Advanced settings
>
following:
Network type — Select the internet protocol type
●
to transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP
●
address of your device.
DNS addresses — Enter the IP addresses of the
●
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
the proxy server.
Settings
Secure to always send
Normal to send your
and from the
— Enter the address of the
— Enter the port number of
181