Nokia N76 User Manual page 102

Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See 'Profiles—set tones', p. 48.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to
answer is disabled.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
If you are using a Text phone
activate it on your device. To activate
Text phone > Use text phone
loopset, select Loopset
Security
To edit settings related to the security, press
select Tools > Settings
and SIM card, Certificate
module.
Phone and SIM card
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards.
102
Beep once or Silent, automatic
or a Loopset, you must
Text phone, select
> Yes. To activate the
> Use loopset > Yes.
> General > Security >
management, or Security
PIN code, PIN2
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See 'Glossary of PIN
and lock codes', p. 103.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Keypad autolock
locked when your device has been idle for a certain period
of time.
Tip! To lock or unlock the keypad manually, press
then
Phone autolock
can set a time-out after which the device automatically
locks. A locked device cannot be used until the correct lock
code is entered. To turn off the autolock period, select
, and
None.
Phone
See 'Glossary of PIN and lock codes', p. 103.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press
commands opens. Select
Lock if SIM card
for the lock code when an unknown SIM card is inserted
code, and Lock code—You can change the
period—Select whether the keypad is
period—To avoid unauthorized use, you
Lock phone.
changed—You can set the device to ask
,
. A list of