Samsung Galaxy S6 User Manual page 252

Connect to a Wi-Fi Network via WPS
Wi-Fi Protected Setup (WPS) is a network security standard that allows you to easily secure a wireless
network connection between your phone and a router.
To connect using a WPS button:
1. From Wi-Fi settings, tap MORE > WPS push button.
2. Tap the WPS button on your router.
3. Follow the prompts to complete the connection.
To connect using a Personal Identification Number (PIN):
1. From Wi-Fi settings, tap MORE > WPS PIN entry.
2. Enter the PIN displayed on your router.
3. Follow the prompts to complete the connection.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
●
Enable Notification When Open Networks Are Available: From Wi-Fi settings, tap MORE >
Advanced > Network notification.

The setting is available when Wi-Fi is turned on.

Tap Network notification to turn the option on or off.
●
Passpoint: Automatically connect to Passpoint-certified Wi-Fi access points.
●
Set Timing for Pausing a Connection: From Wi-Fi settings, tap MORE > Advanced > Keep
Wi-Fi on during sleep and then select a setting.
●
Allow Background Scanning for Wi-Fi Networks (Even When Wi-Fi Is Turned Off): From
Wi-Fi settings, tap MORE > Advanced > Always allow scanning to turn the option on or off.
●
Install Network Security Certificates: From Wi-Fi settings, tap MORE > Advanced > Install
network certificates and select a certificate.
●
Check MAC Address: From Wi-Fi settings, tap MORE > Advanced.
 MAC Address appears below "MAC Address."
●
Check IP Address: From Wi-Fi settings, tap MORE > Advanced.
IP Address appears below "IP Address."

Settings 243