Connection Indicator; Data Cable Transfer; Enhancement Settings - Nokia Mobile Phones User Manual

S e t t i n g s

Connection indicator

• When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
• When blinks, your phone is trying to connect to the other device
or a connection has been lost.

Data cable transfer

To transfer data from your phone to a compatible PC or from a compatible PC
to your phone, use a CA-53 USB data cable. To disconnect the cable from the
device, hold the connector, and remove the cable.
Disconnect the USB data cable from the phone to make a call.
Enable default mode connection
Connect to your PC in Default mode to transfer phone data and files between
your phone and PC using PC Suite.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
is displayed that asks which mode you want to select.
2. Select Accept > Default mode. A notification is displayed stating that
a connection is active.
You can now use PC Suite to connect to your phone.
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the taskbar
at the bottom of your PC screen.
Unplug or Eject Hardware is displayed.
2. Click on USB Device in the Hardware devices window.
Stop a Hardware device is displayed.
3. Highlight USB device, and click OK.
The Safe to Remove Hardware pop-up window is displayed with the following
message "The 'USB Device' device can now be safely removed from the system."
4. Click OK.

■ Enhancement settings

The enhancement settings menu is shown only if the device has been connected
to a compatible enhancement. Select Menu > Settings > Enhancements >
Hearing aid, Headset, Handsfree, or Charger.
68