Saving Energy And Detergent; Programme Default Settings; C Temperature; Spin Speed - Bosch wae28462gb Instruction Manual And Installation Instructions

Saving energy and detergent

For light and normal soiling, you can
save energy (by lowering the washing
temperature), and detergent.
Saving Soiling/note
Reduced temper- Light
ature and deter- No visible dirt or stains. Cloth-
gent quantity as ing
per the recom- odours, e.g.:
mended dosage
■
■
■
Normal
Visible dirt or a few light
stains, e.g.:
■
■
Temperature as Heavy
per the care label,
Dirt and/or stains clearly visi-
and detergent
ble, e.g. tea towels, baby
quantity as per
items, work clothing
the recom-
mended dosage
for heavy soiling
When measuring the amount of
Note:
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information. ~ Page 18
has absorbed body
Light summer/sports
clothing (worn for a few
hours)
T-shirts, shirts, blouses
(worn for up to one day)
Guest bed linen and hand
towels (used for one day)
T-shirts, shirts, blouses
(sweat-soaked, worn a
few times)
Towels, bedding (used for
up to one week)

Programme default settings

0
Programme default
settings
You can find possible
Note:
P r o g r a m m e d e f a u l t s e t t i n g s
programme default settings in the
overview; these differ depending on the
model.
The programme default settings for all
programmes are preset at the factory
and are displayed in the display panel
after the programme is selected.
°C Temperature
(s Temp. °C)
Depending on the programme
progress, you can change the preset
washing temperature (in °C) before and
during the programme.
Press the temperature button repeatedly
until the required temperature is
displayed in the display panel.
The maximum temperature that can be
set depends on the programme that has
been selected.
Programme overview ~
Supplementary sheet for the installation
and operating instructions

0 Spin speed

(Spin, rpm, 0)
Depending on the programme
progress, you can change the spin
speed (in rpm; revolutions per minute)
before and during the programme.
To do this, press the Spin Speed button
repeatedly until the required spin speed
is displayed in the display panel.
The maximum speed that can be
selected depends on the model and
programme that has been selected.
en
13