Mounting Unit In Dashboard; Detaching And Attaching The Front Panel - Sony DSX-A400BT Operating Instructions Manual

Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in). When mounting in a Japanese car, see
"Mounting the unit in a Japanese car" (page 32).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.

2
Mount the unit onto the bracket , then
attach the protection collar .

Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.
32
GB
182 mm (7 1 /
53 mm (2 1 / in)
8
Catch

Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
3 / Sony dealer.
32
TOYOTA

in)
4
Bracket
Existing parts supplied with
your car
NISSAN

Bracket
Existing parts supplied with
your car
Note
To prevent malfunction, install only with the supplied
screws .

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 6).
to dashboard/center console
Bracket
to dashboard/center console
Bracket

