Configurations; Date And Time Settings - Nokia E65 User Manual

S e t t i n g s
Authentication type — Select
•
WEP key settings — Edit the settings for the WEP key.
•
WEP key settings
In the access point settings, select
In an Ad-hoc network, all devices must use the same WEP key.
Select WLAN security sett.
WEP encryption — Select the desired WEP encryption key length.
•
WEP key format — Select whether you want to enter the WEP key data in
•
WEP key — Enter the WEP key data.
•
802.1x security settings
In the access point settings, select
802.1x authenticates and authorizes devices to access a wireless network, and prevents access if the authorization process fails.
Select WLAN security sett.. and from the following:
WPA mode — Select EAP
•
EAP plug-in settings — If you selected
•
access point.
Pre-shared key — If you selected
•
the wireless LAN to which you connect.
The settings available for editing may vary.
WPA security settings
In the access point settings, select
Select WLAN security sett.. and from the following:
WPA mode — Select EAP
•
EAP plug-in settings — If you select
•
point.
Pre-shared key — If you select
•
wireless LAN to which you connect.
The settings available for editing may vary.
EAP
To view the EAP (extensible authentication protocol) plug-ins currently installed in your device (network service), select
Tools Settings Connection
> >
wireless LAN as a data bearer and
scroll to EAP plug-in settings, and press the scroll key.
The extensible authentication protocol (EAP) plug-ins are used in wireless networks to authenticate wireless devices and
authentication servers, and the different EAP plug-ins make possible the use of various EAP methods (network service).
To use an EAP plug-in when you connect to a WLAN using the access point, select the desired plug-in and
The EAP plug-ins enabled for use with this access point have a check mark next to them. To not use a plug-in, select
Disable.
To edit the EAP plug-in settings, select
To change the priority of the EAP plug-in settings, select
plug-ins when connecting to the network with the access point, or
authentication after attempting to use other plug-ins.
The available options may vary.

Configurations

To view and delete configurations for trusted servers, select
You can receive messages from your network operator, service provider, or company information management that contain
configuration settings for trusted servers. These settings are automatically saved in Configurations. You may receive
configuration settings for access points, multimedia or e-mail services, and IM or synchronization settings from trusted servers.
To delete configurations for a trusted server, scroll to the server, and press the clear key. The configuration settings for other
applications provided by this server are also deleted.

Date and time settings

Select Menu Tools Settings
> >
Select from the following:
© 2007 Nokia. All rights reserved.
Open or Shared.
WLAN security mode
WEP key settings and from the following:
>
WLAN security mode
(Extensible Authentication Protocol) or
WPA mode
WPA mode Pre-shared
>
WLAN security mode
(Extensible Authentication Protocol) or
WPA mode > EAP, select which EAP plug-ins defined in your device to use with the access
WPA mode Pre-shared
>
Access points. Select
>
802.1x or WPA/WPA2
Options > Configure.
Date and time.
>
> WEP.
ASCII
> 802.1x.
Pre-shared key
> EAP, select which EAP plug-ins defined in your device to use with the
key, enter the shared private key that identifies your device to
> WPA/WPA2.
Pre-shared key
key, enter the shared private key that identifies your device to the
Options New access point
>
as the security mode. Select
Options Raise priority
>
Options
>
Menu Tools
> >
81
or Hexadecimal format.
(a secret key used for device identification).
(a secret key used for device identification).
and define an access point that uses
WLAN security sett.
to attempt to use the plug-in before other
Lower priority to use this plug-in for network
Settings Connection > Configurations.
>
Menu
>
WPA mode > EAP,
>
Options > Enable.
Options
>