Changing The Barring Password; Certificate Manager; Managing Certificates; Extras - Nokia 9300i User Manual

C o n t r o l p a n e l
• PIN code request — If you set this option to On, the PIN code is requested each time the phone is switched on. Note that this
setting cannot be changed if the phone is switched off or if there is no valid SIM card inserted. Note also that some SIM cards
do not allow you to turn off the PIN code request.
• PIN code — Press Change
that PIN code request
• PIN2 code — Press Change
access some functions, such as the fixed dialing settings, which must be supported by your SIM card.

Changing the barring password

To change the password used for barring voice, fax, and data calls, select
barring page. Select the Barring password
barring password must be four digits long.

Certificate manager

Important: Note that even if the use of certificates makes the risks involved in remote connections and software
installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence
of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted
certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate
not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are
correct.
Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that
the certificate really belongs to the listed owner.
Digital certificates may be used for:
• connecting to an online banking service or another site or remote server to transfer confidential information
• reducing the risk of viruses or other malicious software, and checking the authenticity of software when downloading and
installing it

Managing certificates

Personal certificates are certificates that are issued to you. They are listed on the
Authority certificates are on the
certificates.
To add certificates, select
certificate file. Press Delete
To check the authenticity of a certificate, select
Issued to: field identifies the owner of this certificate. Make sure that this is the name of the party to whom the certificate
belongs. The Fingerprint:
certificate and ask for the MD5 fingerprint of the certificate. Compare the fingerprint with the one shown in the dialog to check
whether they match.
Tip: Check the authenticity of a certificate each time you add a new certificate.
To change the trust settings of a certificate, select
press Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. Select
an application field, and change the value to
To change the private key store password, select
password. Enter the current password, press OK, and enter the new password twice. You need the private key store password
when using personal certificates. The private key store contains the secret keys that come with personal certificates.

Extras

Go to Desk Tools Control panel
> >

About product

To view the version number of the software, select

Location privacy

Some networks allow others to request the position of your device (network service). Note that a separate positioning module
is needed for this service.
Copyright © 2005 Nokia. All Rights Reserved.
to change the PIN code. The PIN code must be 4 to 8 digits long. Changing the PIN code requires
is selected, the device is on, and that there is a valid SIM card inserted.
to change the PIN2 code. The PIN2 code must be 4 to 8 digits long. The PIN2 code is required to
field, and press Change. Enter the current code, and then the new code twice. The
Other page. They are used by some services, such as banking, for checking the validity of other
Security Certificate manager. Press
>
to remove a selected certificate.
Security
field uniquely identifies the certificate. Contact the help desk or customer service of the owner of the
Yes or No. Note that you cannot change the trust settings of a personal certificate.
Security
> Extras.
Security
Add to add a new certificate. You can then browse for the
Certificate manager. Select a certificate, and press
>
Security Certificate manager. Select the certificate, press
>
Certificate manager, select the
>
Extras About product, and scroll to the bottom of the dialog.
>
66
Device security, and select the
>
User page.
Password page, and press
Call
View details. The
View details, and
Change