Nokia 9210 User Manual page 97

Currency: Enter a maximum of three characters to indicate your choice of currency.
You can enter numbers or letters. For example, you can enter 'FIM' for
Finnish currency. This field is used with Unit price below and with Show in
currency.
Unit price: If you use 'units', enter a decimal number for the price of each charging
unit. You must also complete the Currency field above.
Maximum cost limit: You have two options: No limit or a value that you can define
in the field. You can define the limit in either units or in currency. If you
are in a call when the cost limit is reached, the call ends. You cannot make
any more calls. You see a note on the display before and after the call
limit is reached.
Press Calculate costs: The information in this dialog is:
Last call: - The cost of the last call made.
All calls: - The cost of all calls made since the cost counter was reset. See
Figure 27.
Remaining credits - If you have defined a limit in Maximum cost limit this field
displays the amount of money or units remaining.
Press either Show in units or Show in currency to choose how you want
call costs to be displayed in your communicator. 'Units' is a network
measurement, such as '21 units'. 'Currency' is shown in the characters you
have entered in the Currency field.
Press Clear costs to clear the cost counters. You are required to enter your
PIN2 code.
©2001 Nokia Mobile Phones. All rights reserved.
89