Closed User Group; Change Access Codes - Nokia 8210 User Manual

• International except to home country
calls can be made only within and
to your home country.
• Incoming calls
ceived.
• Incoming calls if abroad
be received outside your home
country.
• Cancel all barrings
For each function, except
barrings, you have the following op-
tions: Activate, Cancel, or Status, which
shows the types of barred call.
When you make a call and a barring
mode is activated, the phone may dis-
play a note reminding you of this.
NOTE: When calls are
barred, calls may be possible
to certain emergency num-
bers in some networks (e.g.
112 or other official emer-
gency number).
Fixed dialling (Menu 4-6-3)
This service restricts your outgoing
calls to selected phone numbers, if this
function is supported by your SIM card.
To set this function on or off, or to
save, edit or erase the numbers on the
list, you need to have the PIN2 code.
NOTE: When Fixed Dial Op-
tion is set on, calls may be
possible to certain emergen-
cy numbers in some networks
(e.g. 112 or other official
emergency number).
calls cannot be re-
calls cannot
Cancel all
Copyright © 2004 Nokia. All rights reserved.

Closed user group

(Menu 4-6-4)
This network service specifies the
group of people to whom you can call
and who can call you.
phone to use a user group that the
SIM card owner has agreed upon with
the service provider.
NOTE: When calls are limited
to Closed User Groups, calls may
be possible to certain emergen-
cy numbers in some networks
(e.g. 112 or other official emer-
gency number).
Security level (Menu 4-6-5)
This menu allows you to set the phone
security level on to avoid unauthor-
ised use of the phone. You will need
the security code to set the security
level. The available options are:
• None no security code is needed.
• Memory security code is required
when the phone book memory is
selected.
• Phone security code required when
a new SIM card is inserted.
NOTE: When you change the security
level, all the recent calls lists are
cleared.

Change access codes

(Menu 4-6-6)
With this menu you can change the
access codes: security code, PIN code,
PIN2 code and barring password.
These codes can only include the
characters 0 to 9. The phone prompts
Menu functions
Preset resets the
47