Samsung UA32F6100 User Manual page 16

Issues
Your settings are lost after 30
minutes or every time the TV is
turned off.
You have intermittent loss of
audio or video.
You see small particles when
you look closely at the edge of
the frame of the TV.
You turned the TV off 45
minutes ago, and it turned on
again.
There are recurrent picture/
sound issues.
A reaction may occur between
the rubber cushion pads on the
base stand and the top finish of
some furniture.
✎
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or
dark pixels on the screen. These pixels will have no impact on the performance of the product.
You can keep your TV as optimum condition upgrading the latest firmware on web site (www.samsung.com → Support) by USB.
✎
[UF6100-AR]BN68-04935A-05ENG.indd 16
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. If you
want to change the settings from Store Demo mode to Home Use, press the
select TV mode, and go to MENU
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
• This is part of the product's design and is not a defect.
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded
whilst your watching TV.
• Check and change the signal/source.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
English - 16
Solutions and Explanations
→ Support → Use Mode.
SOURCE button to
2013-10-08 2:14:35