Handwriting Recognition; Volume Control; Device Lock - Nokia 770 User Manual

• Special character key (10) — Open the special characters view, where
you can select from commonly used special characters, symbols, and
language characters.
• Close (11) — Close the on-screen keyboard and handwriting
recognition input area, and save changes.

Handwriting recognition

You can use the stylus as a pen to write text. Write legible, upright
characters, and leave a small horizontal gap between each character. Do
not use cursive writing.
To write common characters and numbers (default mode), write words
as you normally write them.
To write special characters, tap [Abc1] in the left pane of the input area,
and write the characters as you normally write them.
To use handwriting gestures, see the
figure. Draw gesture 1 for a backspace;
gesture 2 for a space; gesture 3 for a line
change; or gesture 4 for a tabulator.
To delete characters, draw the backspace
gesture from right to left over the chosen character.
To insert new characters in and after words, draw them in the intended
positions.

■ Volume control

To adjust the master volume, tap
decrease or increase the volume, drag the volume slider to the desired
position.
Warning: Listen to music at a moderate level. Continuous
exposure to high volume may damage your hearing.

■ Device lock

To avoid unauthorized use of your device, change the lock code, and set
the device to automatically lock after a certain timeout period.
Copyright © 2005 Nokia. All rights reserved.
to access the sound settings. To
Y o u r d e v i c e
19