Specifications; Ec Declaration Of Conformity - Makita 6214D Instruction Manual

SPECIFICATIONS

Model
Capacities
Steel ................................................................................................ 10 mm
Wood ............................................................................................... 21 mm
Wood screw ..................................................................................... 6.4 mm x 55 mm
Tool screw ........................................................................................ 6 mm
-1
No load speed (min )
High ................................................................................................. 0 – 1,100
Low .................................................................................................. 0 – 350
Overall length ..................................................................................... 197 mm
Net weight .......................................................................................... 1.7 kg
Rated voltage ..................................................................................... D.C. 12 V
• Due to our continuing programme of research and development, the specifications herein are subject to
change without notice.
• Note: Specifications may differ from country to country.
Noise and Vibration
The typical A-weighted sound pressure level is not
more than 71 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi 446-8502 Japan declares that this product
(Serial No. : series production)
manufactured by Makita Corporation in Japan is in
compliance with the following standards or standard-
ized documents,
EN50260, EN55014
in accordance with Council Directives, 89/336/EEC
and 98/37/EC.
Yasuhiko Kanzaki
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
2
For European countries only
2
CE 98
Director
6214D
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Kao Lung Tamura Electronics Co., Ltd. No. 4 Industry
1st Street, Ping Tung Industry District Chiao Nan Li,
Ping Tung City, Taiwan declares that this battery
charger
(Serial No. : series production)
manufactured by Kao Lung Tamura Electronics Co.,
Ltd. in Taiwan is in compliance with the following
standards or standardized documents,
EN60335, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC
and 89/336/EEC.
Yasuhiko Kanzaki
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
6314D
13 mm
24 mm
6.4 mm x 55 mm
6 mm
0 – 1,100
0 – 350
208 mm
1.7 kg
D.C.12 V
CE 94
Director