Using The Device As A Gprs Modem; Setting Up Gprs Modem Via Infrared Connection - Nokia 6708 User Manual

G e t t i n g Y o u r D e v i c e C o n n e c t e d a n d S y n c h r o n i z e d
Breaking Bluetooth Connection
1. Tap the icon in the Main screen and then select
Bluetooth on the
2. Uncheck the Bluetooth on

Using the Device as a GPRS Modem

Setting up GPRS Modem via Infrared
Connection
Note: The steps below describe the setup procedure in
Windows XP.
1. Make sure that your device is switched on and the
connection mode has been set to
Connection" on page 95).
2. Align the infrared port of your device with that of your PC.
3. On your PC, click the Start
right-click on My Computer
4. Click the Hardware tab and then click
5. Double-click Modems, and then
Link.
97
Copyright ©2006 Nokia All right reserved
tab.
check box and then tap Done.
Modem (See "Infrared
button on Windows Taskbar,
and select Properties.
Device Manager.
Standard Modem over IR
6. In the dialog that appears, click the
7. Refer to the service provider's setting to enter a command in
the Extra initialization commands
example of the command is
+cgdcont=1,"ip", "APN"
Note: APN (Access Point Node) is a setting by your
network service provider that tells how your data requests
should be routed. Consult your network service provider for
the actual APN address.
8. Click the Start button on Windows Taskbar, select
to, and then Show all connections. Alternatively, you can
click the Start button on Windows Taskbar, go to
Panel, and select Network
9. Click Create a new connection.
10. In the New Connection Wizard
11. Click Connect to the Internet
12. Click Set up my connection manually
13. Click Connect using a dial-up modem
14. In the dialog that follows, click to choose
over IR Link and then click Next.
15. In the dialog that follows, enter a connection name in the
ISP name box, and then click Next.
Advanced tab.
box, and then click OK. An
Connect
Control
Connections.
dialog, click Next.
and then Next.
and then Next.
and then Next.
Standard Modem