Table of Contents
Advertisement
Right side
Component
(1)
(2)
(3)
(4)
(5)
(6)
Hard drive light
Memory card reader
USB 3.0 ports
HDMI port
RJ-45 (network) jack/status lights
AC adapter and battery light
Description
●
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the hard
drive.
NOTE:
For information about HP 3D DriveGuard, see
3D DriveGuard (select products only) on page
Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory
▲
card reader.
Connect an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub.
Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio
component, or a high-speed High-Definition Multimedia
Interface (HDMI) device.
Connects a network cable.
●
White: The network is connected.
●
Amber: Activity is occurring on the network.
●
White: The AC adapter is connected and the battery is fully
charged.
●
Blinking white: The AC adapter is disconnected and the
battery has reached a low battery level.
●
Amber: The AC adapter is connected and the battery is
charging.
●
Off: The battery is not charging.
Using HP
36.
Right side
5
Advertisement
Table of Contents
