To Print Multiple - Brother P-Touch 18R User Manual

EDITING A LABEL
6
Press the
The Bar Code Setup screen is displayed.
7
Select an attribute using the
set a value for that attribute using the
The "C-Digit" attribute is only available for the
CODE39, I-2/5 and CODABAR protocols.
8
Press the
The template text entry screen is displayed.
Caps mode can be used when entering text.
9
Enter the text and then press the
Repeat this for each text field.
After all text fields are entered, the print menu is
displayed when the
10
Select "Print" using the
label.
• Select "Edit" to change the text data or style settings.
• Select "Quit" to exit the Auto-Format function.
• Press the
• On the Style and Bar Code Setup screens, press the
attribute to the default value.
• Refer to the Templates table for a list of available templates.
• If the width of the current tape cassette does not match the set width for the selected layout,
an error message is displayed when you try to print or preview the label. Press the
any other key to clear the error message, and insert a tape cassette of the correct width.
• If the number of characters entered exceeds the limit, an error message is displayed when the
key is pressed. Press the
text using fewer characters.
Preview and print options for templates
• When the print menu is displayed, press the
• To print the label directly from the Preview screen, press the
• To print multiple copies, sequentially numbered copies, or a mirror image of the label,
with the print menu displayed hold down the
the Print Options menu.
36
Using Auto-Format Layouts
key.
key.
key is pressed.
or
key to return to the previous step.
key or any other key to clear the error message, and edit the
or keys, and then
or keys.
key.
keys and then press the
key to preview the label layout.
key and press the
key to print the
key to change the selected
key or
key.
key to display