Yamaha F80A Owner's Manual page 126

w
e
t
q
EMU01577
NOTE:
If any water is in the fuel, the float
rise. If so, remove the cup and drain the
water.
1) Remove the nut holding the fuel filter
assembly if so equipped.
2) Unscrew the filter cup 1, catching
000137
any spilled fuel in a rag.
3) Remove the filter element 2, and
wash it in solvent.
r
Allow it to dry. Inspect the filter ele-
ment and O-ring 3 to make sure they
are in good condition. Replace them if
necessary.
4) Reinsert the float in the filter cup,
making sure the indentations in the
float ring match the ribs inside the fil-
000138
ter cup. Reinstall the filter element in
the cup. Make sure the O-ring is in
proper position in the cup. Firmly
screw the cup onto the filter housing
4.
5) Attach the filter assembly to the
bracket.
6) Run the engine and check the filter
and lines for leaks.
4-15
GB
5 will