Sony KDL-65W950B Repair Manual page 19

When replacing the Tuner Board only:
2
33. Press to verify the Tuner Board replacement results.
DIGITAL (MODEL)
Board Check
OK
TUNER BOARD OPTION: STANDARD
CAUTION: If the Tuner Board is a mismatch to the Main Board,
a "NG: DIFFERENT KIND OF TUNER BOARD HAS BEEN
CONNECTED" will display.
34. Press then
RETURN
DIGITAL (MODEL)
Board Check
1. Replace MAIN BOARD (and TUNER BOARD)
2. Replace TUNER BOARD only
KDL-65W950B
SERVICE
and 0 to save the changes.
MUTE
SERVICE
WRITE
SECTION 3 - REPAIR INFORMATION
35. Clear the Self Check screen.
a. Press
b. Press the following buttons on the Remote Commander within
1 second of each other:
DISPLAY
SELF CHECK
000 RESERVED
000 RESERVED
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 AUD_PROT
003 HDMI_EQ
003 TU_DEMOD
004 VLED
004 LD_ERR
005 HFR_ERR
005 TCON_ERR
005 P_ID-ERR
006 BACKLITE
007 TEMP_ERR
007 FAN_ERR
010 EMITTER
101 VPC_WDT
102 MEPS_WDT
103 HOST_WDT
104 STBY_WDT
00345 000333 06789
c. To clear the error history and error count press
d. Press
36. Cycle AC Power (Unplug and plug AC Cord from the outlet).
to exit Service Mode.
POWER
5
Channel Volume
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
120123132522 120123113645 --------------------- 02
--------------------- --------------------- --------------------- 00
--------------------- --------------------- -------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
--------------------- --------------------- --------------------- 00
to exit Self Check Mode.
POWER
-
POWER
Error Count
.
8 0
15