Table of Contents
Advertisement
The applications that may use (E)GPRS are MMS, video streaming, browsing sessions, email, remote SyncML,
Java application downloading, and the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of GPRS if this is available in the
network. You cannot select between EGPRS and GPRS, but for some applications you may be able to select
GPRS or
GSM data
(circuit switched data, CSD).
Packet data connection
Select
Menu
>
Settings
options:
•
When needed
to register and establish an (E)GPRS connection when an application using (E)GPRS needs it,
and to close the connection when you end the application.
•
Always online
to set the phone to automatically register to an (E)GPRS network when you switch on the
phone.
or
indicates that the GPRS or EGPRS service is available.
If you receive a call or a text message, or make a call during a GPRS or EGPRS connection,
that the GPRS or EGPRS connection is suspended (on hold).
Packet data settings
You can connect the phone using Bluetooth wireless technology, infrared, or USB data cable connection to a
compatible PC and use the phone as a modem to enable (E)GPRS connectivity from the PC.
To define the settings for (E)GPRS connections from your PC, select
data
>
Packet data settings
active access point
>
Alias for access
Select
Packet data access
network, and select OK.
>
Connectivity
>
Packet data
>
Active access
point, and activate the access point you want to use. Select
point, enter a name to change the access point settings, and select OK.
point, enter the access point name (APN) to establish a connection to an (E)GPRS
Copyright © 2005 Nokia. All rights reserved.
>
Packet data
connection, and from the following
Menu
>
Settings
or
indicates
>
Connectivity
>
Packet
Edit
73
Advertisement
Table of Contents
