Nokia 6260 User Manual page 134

Many service providers require you to use an IAP for your default access point.
Other service providers allow you to use a WAP access point. Contact your service
provider for more information.
Start to fill in the settings from the top since, depending on the data connection
you select (Data bearer), only certain fields are available.
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are
connection you select, only certain setting fields are available. Fill in all fields
marked with Must be
empty, unless you have been instructed otherwise by your service provider.
To be able to use a data connection, the network operator or service provider must
support this feature, and if necessary, activate it for your SIM card
• Access point name
establish a connection to the GPRS network. You obtain the access point name
from your network operator or service provider.
• Dial-up number (for data call only) - The modem telephone number of the
access point.
• User name - Write a user name if required by the service provider. The user
name may be needed to make a data connection, and is usually provided by the
service provider. The user name is often case-sensitive.
• Prompt password - If you must key in a new password every time you log onto
a server, or if you do not want to save your password to the phone, choose Yes.
Copyright © 2004 Nokia. All rights
GPRS or Data
defined, or with an asterisk. Other fields can be left
(for packet data only) - The access point name is needed to
call. Depending on what data
134