Table of Contents
Advertisement
TROUBLESHOOTING
Engine Troubleshooting
Problem
Noise in drive
system
Poor low RPM
performance
Engine doesn't turn
Engine doesn't start
(electric start
models)
102
Probable Cause Solution
Broken drive clutch
components
Bearing failure/
chaincase, jackshaft,
or front drive shaft
Drive belt surface
flat spots
Drive chain loose
Drive chain worn,
sprocket teeth
broken
Worn drive belt
Excessive belt/
sheave clearance
Sticky clutch
Seized engine
Hydrostatic lock
Wire connections
• SEE YOUR DEALER.
• SEE YOUR DEALER.
• Inspect and replace as needed.
• Inspect and adjust (or replace).
• SEE YOUR DEALER.
• Inspect and replace as needed.
• SEE YOUR DEALER.
• SEE YOUR DEALER.
• SEE YOUR DEALER. Seizure is a
result of poor lubrication,
inadequate fuel supply, broken parts
or improper cooling.
• Fuel may have entered the crankcase
while the vehicle was standing or
being transported. SEE YOUR
DEALER to correct the cause. Drain
plug(s) are located on the lower
crankcase for emergency draining.
• SEE YOUR DEALER.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
