Phone; Voice Commands - Nokia 6208C User Manual

● Voice clarity — to enhance speech intelligibility,
especially in noisy environments
● Speed dialling — to dial the names and phone numbers
assigned to the number keys (2 to 9) by pressing and
holding the corresponding number key
● Call waiting — to have the network notify you of an
incoming call while you have a call in progress (network
service)
● Call duration display — Select On to display the duration
of the call in progress
● Summary after call — to briefly display the approximate
duration after each call
● Send my caller ID — to show your phone number to the
person you are calling (network service). To use the setting
agreed upon with your service provider, select Set by
network.
● Outgoing call line — to select the phone line for making
calls, if your SIM card supports multiple phone lines
(network service)

Phone

Select Menu > Settings > Phone and from the following:
● Language settings — to set the display language of your
phone, select Phone language and a language. To set the
language according to the information on the SIM card,
select Phone language > Automatic. To set a language
for the voice commands, select Recognition lang..
● Memory status — to check the memory consumption
● Automatic keyguard — to lock the keypad automatically
after a preset time delay when the phone is in the standby
mode and no function has been used
34
● Security keyguard — to ask for the security code when
you unlock the keyguard
● Voice recognition —
● Flight query — to be asked whether to use the flight
mode when you switch the phone on. With the flight
mode, all radio connections are switched off.
● Phone updates — to receive software updates from your
service provider (network service). This option may not be
available, depending on your phone.
updates over the air", p. 35.
● Operator selection — to set a cellular network available
in your area
● Help text activation — to select whether the phone
shows help texts
● Start-up tone — to play a tone when you switch the
phone on
● Confirm SIM actions — (network service)
services", p. 51.

Voice commands

Call contacts and use your phone by speaking a voice
command.
Voice commands are language-dependent. To set the
language, select Menu > Settings > Phone > Language
settings > Recognition lang. and your language.
To train the voice recognition of your phone to your voice,
select Menu > Settings > Phone > Voice recognition >
Voice recog. training.
To activate a voice command for a function, select Menu >
Settings > Phone > Voice recognition > Voice
See "Voice commands", p. 34.
See "Software
See "SIM
© 2008 Nokia. All rights reserved.