Table of Contents
Advertisement
Preparing the appliance
Position the appliance in front of the
housing unit.
Fit cover strip into position.
Push the appliance two-thirds of the
way into its niche. When doing this,
make sure that the mains cable does
not get trapped.
Tip: To help you push it into position,
tie a piece of string around the plug to
"increase" the length of the connection
cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the ap‐
pliance is in the unit.
Installing the appliance
Remove cover from the top corner
of the appliance.
Secure part using screw firmly
into the top left-hand side of the ap‐
pliance.
57
Hide quick links:
Advertisement
Table of Contents
