7. OPERATION PRINCIPLE AND REPAIR METHOD OF ICEMAKER
7-1 OPERATION PRINCIPLE
7-1-1 Operation Principle of Icemaker
Power On
Start Position
Icemaking
Mode
Harvest
Mode
Fill
Park Position
Test Mode
1. Turning the Icemaker stop switch off (O) stops the icemaking function.
2. Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.
¥ Adjusts EJECTOR to
¥ Waits until water becomes cold after starting the
icemaking operation.
¥ Runs MOTOR to drop ice from the tray into the ICE BIN.
¥ Performs
the SOLENOID in ICE VALVE.
¥ With the detect lever, checks if the ICE BIN is full.
¥ To operate LINE and SERVICE, press and hold the
for 3 seconds. The icemaker will run through 3 stages:
Harvest
Icemaker
Cube Size
Indicator Light
Start Position
after supplying water by operating
Icemaking Mode
.
Fill
Icemaking
Automatic
Shut off Arm
Power Switch
Cube Size
Select Button
- 20 -
with power on.
Fill Key