Table of Contents
Advertisement
Pump does not achieve shut off.
The wall switch may be used for
battery charge may be the cause.
stuck.
Try tapping the switch cap
of
a screwdriver.
If
the pump
normally,
but
fails
to
shut off,
mechanism.
Pump head leaks.
temporary control of the pump.
:-' . low
Or the pump switch mechanism may be
on the end of the pump with the handle
appears in all other respects
to
run
you
may
have
to
replace
the switch
If the pump head leaks, first try to tighten the screws in the pump head
assembly until they are snug.
CAUTION:
Do not over tighten.
The leak may be from a crack in the
pump head assembly.
If so, then replace.
One cause of the pump head cracking may be water freezing inside the
pump head.
If the leaking water is escaping back near the motor, check
for a leaking or broken piston.
-27-
Advertisement
Table of Contents
