Table of Contents
Advertisement
Maintenance
Resetting the Motor Thermostat
Your Shark
Upright Vacuum is
®
equipped with a protective Motor
Thermostat. If the motor should
overheat, the thermostat shuts off
the power.
To reset the Motor Thermostat:
Move the Power Button to the
"O – Off" position.
Unplug the vacuum.
Check for clogged hose or filter;
unclog hose and replace filter.
Refer to Checking for Blockages
on page 11.
12
www.lakeland.co.uk
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the
"I – On" position to start the
vacuum.
Note: if vacuum still does not start,
call 0800 862 0453.
A
1
Cleaning the Pet Hair Power
Brush -
Slide locking latch (A) forward.
Gently tilt brush housing upward
to open.
IMPORTANT: DO NOT force; it
will not open all the way.
Remove debris from turbine
wheel and air passage.
Advertisement
Table of Contents
