Options During A Call - Nokia 3660 Extended User Manual

Tip! To adjust the
phone tones for different
environments and events,
for example, when you
want your phone to be
silent, see 'Profiles', p. 99.
Tip! To end both
calls at the same time,
select Options→ End all
calls and press OK.
Fig. 3 Options during a
call.
20 Copyright © 2003 Nokia. All rights reserved.
Note: It is possible that the phone assigns a wrong name for the phone number.
This happens if the phone number of the caller is not stored in Contacts but the
seven last digits of the number match another number that is stored in Contacts.
In this case, call identification is not correct.
Call waiting (network service)
If you have activated the Call waiting service, the network will notify you of a new
incoming call while you have a call in progress. See
1 During a call, press to answer the waiting call. The first call is put on hold.
To switch between the two calls, press Swap.
2 To end the active call, press

Options during a call

Many options that you can use during a call are network services. Press
a call for some of the following options:
Mute or Unmute, End active call,
Drop participant, Answer, and Reject.
Swap is used to switch between the active call and the call on hold.
Transfer is used to connect an incoming call or a call on hold with an active call and to
disconnect yourself from both calls.
Send DTMF is used to send DTMF tone strings, for example, passwords or bank account
numbers.
Glossary:DTMF tones are the tones you hear when you press the number keys on
the phone keypad. DTMF tones allow you to communicate with voice mailboxes
and computerised telephony systems, for example.
1 Key in the digits with
transmitted while the call is active. Press
'Call waiting: (network
.
End all calls, Hold or Unhold, New
- . Each keystroke generates a DTMF tone, which is
repeatedly to produce: *, p (inserts a
service)', p. 29.
Options during
call, Conference, Private,