Haier LE19C1320 Service Manual page 11

• After plugging a USB storage device into the USB port, the Multimedia List menu will be displayed.
• Select MultiMedia Menu in the Feature Menu to choose JPEG Viewer or MP3 MusicBox. These two items are
activated only if the USB storage device is plugged into the USB port.
• Once USB storage device is connected: Press the USB key to switch to the other multimedia mode. (JPEG
–>MP3 / MP3 –>JPEG)
[JPEG Viewer] – Press Menu to display the control menu. Press Enter to enlarge the selected photo (orange
frame) in browser.
• Image Delay: Set display time for each picture in the slide show mode. There are three options: Fast, Slow,
and Normal.
• Music On Slide Show: Enable background Music during the slide show. It will play the MP3 files in sequence
in the current folder repeatedly. The Music On Slide Show item will be grayed out if there are no MP3 files in
the current folder.
• Start Slide Show: Enter Slide Show mode.
• Rotate Photo: Rotate selected picture. (0/90/180/270)
• Back to Upper Folder: Return to the upper folder.
• Back to Root Folder: Return to root folder.
• Back to Browser: Return to Browser mode. (Photo page with control menu.)
• Exit: Exit JPEG Viewer and return to original source. (Browser with Control menu.)
[MP3 MusicBox]
• ListInfoBar (at the bottom): This part contains play list information: "Current Directory", "Total File(s)", "Total
Folder(s)", "Current Item" in current directory and Key Help Bar.
• PlayList (on the right side): This part contains MP3 music files.
• ControlPanel (on the left side):
Bass, Treble, Balance, Volume: Adjust the audio tone.
Mute Screen: This provides an option for enabling (On) or disabling (Off) the auto
turn-off of the backlight while playing MP3 media. The setting is valid in the MP3 media player interface only.
After setting to On, the backlight will be turned-off automatically after 10 seconds if no key is pressed. Press
any key except POWER and the TV backlight will turn on again.
Preset: Resets all MP3 settings to the default values.
Exit: Exit MP3MusicBox interface.
[Time Shift] – The feature allows the viewer to pause and record the currently watched digital program (ATSC
or QAM) and resume to the point where it was paused. Insert the USB storage device to activate the Time Shift
function in the Feature menu.Note: – Formatting the USB 2.0 storage device will be needed. Save your original
data before formatting. All the data stored in the USB device will be erased after formatting.
– Sleep timer will be suspended if it had been set before Time Shift.
• USB Drive Storage
Format: Select to format the USB drive and locate an area for the Time Shift function.Note:
11