•
Homepage
- Key in the homepage address of the WAP service that you
want to use, press
•
Session mode
- Select
•
Connection security
When the connection security is On, the phone tries to use a secure
connection to the WAP service. If a secure connection is not available, the
connection will not be made. If you wish to connect anyway, with a non-
secure connection, you must set the connection security to Off.
•
Data bearer
- Select
see
Settings when GSM data is the selected data bearer
GPRS is the selected data bearer
For pricing, connection speed, and other information, contact your network
operator or service provider.
Settings when GSM data is the selected data bearer
•
Dial-up number
- Key in the phone number and press OK.
•
IP address
- Key in the address, press
obtain the IP address from your network operator or service provider.
•
Authentication type
•
Data call type
- Select
•
Data call speed
- Select the speed you want to use, or select Automatic.
Automatic
is only available if the currently selected data call type is Analogue.
The actual data call speed depends on the service provider.
Copyright
for a dot and press OK.
Permanent
or Temporary.
- Select
On
or Off.
GSM data
or GPRS. For settings for the selected bearer,
below.
for a dot and press OK. You can
- Select
Secure
or Normal.
Analogue
or ISDN.
©
2002 Nokia. All rights reserved.
and
Settings when
78