Auto Mode Operation; Temperature Adjustment During Auto; Fan Speed - Mitsubishi Electric SRK71ZK-S User Manual

AUTO mode operation

Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Display in OFF status
• The current time and preset
OPERATION MODE are displayed
while the air conditioner is turned
off.

Temperature adjustment during AUTO

Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
the button.During automatic operation, 24°C is preset both for heating and cooling.

FAN SPEED

You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
Silent operation
1
2
NOTE
• In case air is not blowing out
during the operation.
Page 19
• When the included clean filter is
installed the air conditioner will
clean the air during automatic
operation.
When a change in temperature is required.
1
When it is a little cold
Press the
Each time the
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
change.
When it is a little hot
Press the
Each time the
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
temp.(°C)
FAN SPEED
AUTO
HI
MED
LO
ULO
– 8 –
When the unit is not in AUTO mode:
Press MODE button.
Move the [ mark] to the (Auto) position.
Point the remote control toward the air-conditioner, and
Press the ON/OFF button.
To stop:
AUTO mode can be
operated by simply
pressing the ON/
OFF button.
• If you do not want the AUTO mode program, change
to COOL, HEAT, DRY or FAN instead of AUTO.
• Airflow direction adjustment procedure.
Press the or button.
button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not
button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
Remote Control display
-6 -5 -4 -3 -2 -1
18 19 20 21 22 23
Press the FAN SPEED button.
Move the [ mark] to the preferred fan speed position.
AUTO HI MED
NOTE
• When changing FAN SPEED from HI to LO, the sound
of refrigerant flowing may be heard.
Press the ON/OFF button.
Page 9
Page 10
+ 0
+1 +2 +3 +4 +5
24 25 26 27 28 29
LO ULO
button or
+6
30