Create A Welcome Note; Confirm Uim Service Actions; Choose A Banner - Nokia 3205 User Manual

DTMF tones are sent during an active
call. You can send them manually
from your phone's keypad, or send
them automatically by saving them
in your phone.
Set type
1. At the standby screen, select
Menu > Settings
settings > DTMF tones
DTMF tones and press Select.
2. Select one of the following
options and press Select:
Continuous — the tone sounds
for as long as you press and hold
a key.
Fixed — Used to send tones of the
duration you specify in the
tone length option.
Off — Used to turn off tones. No
tones are sent when you press a
key.
Set fixed length
You can also specify DTMF tone
length when using the
At the standby screen, select
> Settings > Phone settings
tones > DTMF tone length
(0.1 seconds) or Long
and press Select.

Create a welcome note

You can write a welcome note which
briefly appears on the display screen
whenever you switch your phone on.
> Phone
> Manual
DTMF
Fixed option.
Menu
> DTMF
> Short
(0.5 seconds)
Copyright © 2004 Nokia. All rights reserved.
S e t t i n g s ( M e n u 4 )
Note: Predictive text input is
not available for entering
Welcome note text.
1. At the standby screen, select
Menu > Settings
settings > Welcome note
press Select.
2. Enter a note (up to 44
characters).
Press the * key to display and
select from available special
characters.
3. When you are finished, press
Options > Save, and press Select.
Scroll to Delete
if you want to delete the previous
text and begin creating another
welcome note.

Confirm UIM service actions

If you select this option, the phone
will show confirmation messages
when you use UIM card services.
Please check with your service
provider for more details.

Choose a banner

Banner is a network service. See
"Network services" on page 9
more information.
If your wireless service provider
supports this feature, then you can
choose whether the display shows
the operator logo when the phone is
in the idle state.
> Phone
and
and press Select
for
53