GE GTD81ESPJMC Owner's Manual page 16

Before you call for service...
Problem
No numbers displayed
during cycle, only lights
Time Remaining
jumped to a
lower number
Dryer is running but
00 is displayed in
Time Remaining
Clothes are still wet
and dryer shuts off
after a short time
Dryer turns off
16
Possible Causes
Dryer is continuously
monitoring the amount of
moisture in the clothes
The estimated time may change • This is normal.
when a smaller load than usual
is drying
The Extended Tumble
option was chosen
The door was opened mid-cycle.
The load was then removed from
the dryer and a new load put in
without selecting a new cycle
Small load
Load was already dry except
for collars and waistbands
Dryer is not level
Very small load (such as one item) • Use the Timed Dry cycle option, select the desired dry time.
is not activating the dry sensor
What To Do
• This is normal. When the dryer senses a low level of
moisture in the load, the dryer will display the dry time
remaining.
• This is normal. During Extended Tumble option, the
time remaining is not displayed. The extended tumbling
option lasts approximately 60 minutes.
• A dry cycle must be re-selected each time a new load
is put in.
• When drying 3 items or less, choose Speed Dry or Timed Dry.
• Choose Speed Dry or Timed Dry to dry damp collars
and waistbands. In the future, when drying a load with
collars and waistbands, choose More Dry.
• Move dryer to an even floor space or adjust leveling legs
as necessary until even.
GEAppliances.com