Akasa EVO 120 Installation Instructions Manual page 5

3
Stick the protective insulated film
onto the back of the heatsink
retention brackets.
4
for AMD K8
Place the EVO120 on the top of the
CPU, align two holes ( shown in red
as the picture below ) of heatsink
retention bracket with the
Motherboard holes.
Using the K8 screws
H H
inserted, screwing down into the
motherboard backplate.
D
O
I
with spring
Apply the proper amount of thermal
compound on the CPU surface, a thin
film is ideal, extra thermal compound
will not improve performance.
Make sure the CPU surface is perfectly
clean. If not, clean with Isopropyl or
Akasa Timclean.
4