Shark S3101NUK Owner's Manual page 3

Quick Start
1
ASSEMBLE
1
Fit together the extension tubes as shown in
the illustration. See page 2 for more detailed
assembly instructions.
2
Place the cleaning pad underneath the mop
head, with quick fastener strips facing up.
Simply press the pad to the mop to attach it.
0800 862 0453
2
3
FILL
3
Remove the cap to fill the Water Tank. Using
the filling flask, fill the tank, keeping the water
under the "MAX FILL" line. Don't forget to
replace the cap.
4
PRIME STEAM
4
Plug in the mop. Wait 30 seconds for the unit
to heat up and the steam to be ready.
Push the handle toward the mop head in a
pumping motion. To prime simply pump the
handle 10-15 times to generate the steam.
QUICK TIP: Customise steam output
by slow or fast mopping with a forward
and backward motion.
5