Basic Operation - Craig CVD508 Owner's Manual

Press the Direction
Press the Direction
the settings and exit.
1. OSD Language: To select and set the On Screen Display language.
2. Signal Type: To select and set the TV source to Air or Cable to match the TV system
you are.
(If you do not know the TV system you are, please consult the TV signal
provider in your area).
3. When selected, press the Direction
stations.

BASIC OPERATION

1. Connected the unit to power and external devices as previous procedures.
2. Press the (Power) button on the unit or remote control to power On/Off
the unit.
3. When power on the unit in first time or after user reset, set up the unit as
the section of "Setting in First Time Use" on page
4. Press the CH
After setting,
repeatedly to select the desired available channel. Or,
remote control
Press the numeric and "-" (Dash) buttons to select the desired available
channel directly. For example, press the buttons "3" + "2" + "-" + "2" to
select and watching channel 32-2.
5. Press the V (Volume) + or – button on the remote control to set volume level.
6. Press the EPG button to read the Electronic Program Guide. (Function
depends on the Digital TV signals emit from TV station.)
7. Press the Mute button to turn off the sound temporary, press again to turn it back.
8. Press the AUDIO button repeatedly to select the audio channel. (Function
depends on the Digital TV signals emit from TV station.)
9. Press the SIGNAL button to read the signal level of current station, press
again to turn it off.
10. Press the RETURN button to return to previous station.
11. Press the ASPECT button repeatedly to set to 4:3 or 16:9 to match the
aspect ratio of the connect TV and playing program.
12. Press the OSD (On Screen Display) button repeatedly to read (and turn off)
the information of current status.
13. Press the FAV (Favorite) button, the favorite list will appear on the screen.
Use the Direction and OK button to edit the list as desire. After edit, press
the FAV + or – button repeatedly to select the channel in the list.
14. Press the CC (Close Caption) button repeatedly to activate and set the CC
functions.
MENU
Press the MENU button, the setting menu will appear on the screen, use the
Direction, OK and EXIT buttons to set or reset the settings.
or button to select and highlight the function you need to set.
or button to set. When finished, press the OK button to confirm
to auto search and stored the available TV
◄or ► button on the unit or CH ▲ or ▼
.
9
10
on the