Download Print this page

TP-Link HA100 Quick Start Manual

Hide thumbs Also See for HA100:

Advertisement

Quick Links

Play Music on Another Smart Device
1. On the currently paired device, end the connection by:
Disabling Bluetooth or disconnecting TP-LINK_Music, or
Placing its back against the NFC Tag or Music Receiver (only for NFC-enabled
Android devices)
2. On another device, pair to the Music Receiver, then play and enjoy music!
Bonus Tips
After pairing a second device, you can restore connection of the former device to
enjoy music from them in turns. Simply pause music on one device and play on the
other one.
Note that audio may delay when switching from an iOS device.
FAQ
Q1. Why can't I pair the Music Receiver?
A. The Music Receiver is ready to be paired only when its LED turns white. Check the LED.
If it is off, re-plug the power cable or try another power outlet.
If it is blue, check your other paired devices and end the connection.
Q2. What can I do if my music does not come out from my stereo?
A1. Make sure your smart device and the Music Receiver are successfully connected, within 20
meters (66 feet) of each other, and within a direct line of sight. The Music Receiver will be
disconnected if your device's Bluetooth signal is blocked, interfered, or out of range for
longer than 5 minutes.
A2. Make sure your stereo and the Music Receiver are correctly connected via one of the
provided audio cables, and both are powered on.
A3. Make sure the volume on your music player and stereo are at an audible level.
Need more information?
Visit our website: www.tp-link.com
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CE Mark Warning
1588
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
©2016 TP-LINK
7106505793 REV2.0.0
HA100
Quick Start Guide
Bluetooth
Music Receiver
Bringing Bluetooth to your home stereo

Advertisement

loading

Summary of Contents for TP-Link HA100

  • Page 1 Note that audio may delay when switching from an iOS device. A3. Make sure the volume on your music player and stereo are at an audible level. Bringing Bluetooth to your home stereo Need more information? Visit our website: www.tp-link.com ©2016 TP-LINK 7106505793 REV2.0.0...
  • Page 2 Connect Pair Enjoy Method 1: Bluetooth pairing Method 2: NFC pairing It's music time! Add Bluetooth to your home stereo as shown. The LED on the Music Receiver (Only for NFC-equipped Android devices) will turn white. Keep in mind that you can play your music from up to 20 meters (66 feet), 1.