Security Settings; Enhancement Settings; Keyguard Settings - Nokia 1100 User Manual

Enhancement settings

You can use your phone with many Nokia enhancements. However, the Enhancement
settings menu appears only after an accessory has been connected to the phone at least
once. You can select a default profile that will be associated with each accessory.
• Headset (such as the HDC-5 or HDE-2)
• Handsfree Car kit (such as the CARK-125 or PPH-1)
• Loopset (LPS-3)
• TTY/TDD Adapter (HDA-9)

Keyguard settings

Use Automatic keyguard to automatically lock the phone keypad after a preset time delay.
The phone must be idle in the standby mode. You can also lock the keypad of the phone with
Keyguard code.
• Select Menu > Settings > Keyguard settings > Automatic keyguard > On. When Set
delay appears, key in the time and press OK. You can set the time from 10 seconds to
60 minutes. To deactivate the automatic keyguard, select Off.
• Select Menu > Settings > Keyguard settings > Keyguard code request, key in the
security code, and press OK. After you have selected On, the phone asks for the security
code every time you press Unlock. To deactivate the security keyguard, select Off.
See also "Lock the keypad" on page 10.

Security settings

Note: When calls are restricted, calls still may be possible to the official emergency
number programmed into your phone.
Several types of codes are used in the phone:
• The security code, supplied with the phone, protects your phone against unauthorized
use. The preset code is 12345.
• The PIN code, supplied with the SIM card, protects the card against unauthorized use.
The preset code is 1234. If you enter the PIN code incorrectly three times in succession,
the SIM card is blocked. You must enter the PUK code to unblock the SIM card and set
a new PIN code.
• The PIN2 code is supplied with some SIM cards and is required to access certain
services, such as charging unit counters. If you enter the PIN2 code incorrectly three
times in succession, PIN2 code blocked appears on the display, and you will be asked
for the PUK2 code.
• The PUK and PUK2 codes may be supplied with the SIM card. If this is not the case,
contact your local service provider.
PIN code request—You can set your phone to ask for the PIN code of the SIM card when
the phone is switched on. Some SIM cards require activating this function at all times.
22 Copyright © Nokia 2003