7
Stitch length and Differential feed levers
.07
1
2
Fig. 7 - 07
7
Control panel
.08
The description can be found in the separate instruction manual for the motor.
7
Puller
.09
(-948/26)
The description can be found in the separate instruction manual for the Puller.
3
● To set the stitch length, press lever 1 a
little to the right and move it to the re-
quired stitch length.
● Adjustment levers 1 and 2 are used to
adjust the differential feed stroke (also
see Chapter 9.04 Adjusting the differen-
tial feed.
Controls
17