Adjustment - Haier TDVCF2016 Service Manual

12.

Adjustment

A. Factory adjustment information
Method to enter the factory mode:press POWER to let the set go to STANDBY mode,then
press DISP\MUTE\PICT\INPUT in turn. The set will be turned on and enter the factory
mode. Press the UP and DOWN keys besides PLAY/ENTER to select the item, then press
LEFT and RIGHT keys to enter the selected item. You can exit using MENU button.
Factory mode means service mode.
B. Factory mode menu
MODE FUNCTION
1. H/R Heat Run
2. SCRN Screen
3. S/T Sound Test
4. MAIN IC Main IC data
5. AGC IF control
6. GEO Geometry
7. P/T Picture Test
8. WB White Balance
9. DP Digital Preset
10. FACT Factory Reset
11. PG PG Adjust
12. PATH PATH Adjust
Adjust methodes(TV)
- Connect AC power cord of set.
- Push buttons on remote controll in sequence as follows in stand-by mode
DISPLAY -> MUTE -> PICT -> INPUT
- Using ▲/▼ buttons, select the item you wish to adjust.
- Using / buttons, enter the item you wish to adjust.
- You can exit using MENU button.
(1). H/R
- Select H/R mode.
- White pattern will be appeared on the screen.
- Befor adjust factory data, heat-run should be excuted more than 30minitues.
- Using MENU button, exit H/R mode.
(2). SCRN
- Select SCRN mode.
- You can see the one horizontal line on the screen.
Adjust the screen locating on FBT till the horizontal line may be disappeared.
- Using MENU button, exit SCRN mode.
Color Television
REMARK
White pattern
Bright. Horizontal line on the screen
Volume, Bass, Treble, Balance control
Test Chroma IC data
RF AGC Delay point control
Screen Center adjust
Bright, Contrast, Sharpness, Tint, Color adjust
White balance adjust
sub-bright control
Set default data
PG Delay auto-adjust
Deck path adjust (center, max, min)
4454
Model：20S62(TDVCF2016)