Panasonic LUMIX DMC-GF8K Basic Operating Instructions Manual page 11

19
30
19
Touch screen (P19)/monitor (P17)
Flash open lever
•
20 The flash opens, and recording with the flash
becomes possible.
21
Motion picture button (P26)
22
[(] (Playback) button (P27)
23
[HDMI] socket
24
[AV OUT/DIGITAL] socket
Cursor buttons
•
These operating instructions expresses the
up, down, left, and right of the cursor button
as 3/4/2/1.
3/[È] (Exposure Compensation)
25
] (White Balance)
1/[
] (Auto Focus Mode)
2/[
4/[ ] (Drive mode)
–
Single/Burst/Auto bracket/Self-timer
Control dial
•
In these operating instructions, turning the
control dial is indicated as follows.
26
27
[MENU/SET] button (P20)
20
31 32 33 34
21 22
28
29
[DISP.] button
•
28 Each time this is pressed, the display on the
monitor is switched.
[ ] (Delete) button (P28)/
29
[ ] (Quick Menu/Return) button
(P20)
[REC. SETTING RESET] button (P19)
•
30
Use this button to restore the default
recording settings.
Tripod mount
•
It may not be possible to attach and securely
31 fasten a tripod with a screw length of 5.5 mm
or more to the camera. Doing so may also
damage the camera.
DC coupler cover
•
When using an AC adaptor, ensure that the
Panasonic DC coupler (DMW-DCC15:
optional) and AC adaptor (DMW-AC10G:
32 optional) are used.
•
Always use a genuine Panasonic AC
adaptor (DMW-AC10G: optional).
•
When using an AC adaptor, use the AC
cable supplied with the AC adaptor.
33
Release lever (P13)
34
Card/Battery door (P13)
Preparation/Basic
23
24
25
26
27
11
(ENG) SQT1286