Sanyo VPC-J2EX Instruction Manual page 33

10
Press the shutter release button half-
way (focus-lock).
h The autofocus locks on the subject,
and the image in the LCD monitor
appears clearly.
11
Continue to gently press the shutter
release button all the way.
h The image is captured.
View the image (details on pages 72, 73)
Now let's take a look at the image you cap-
tured.
12
Set the selector dial to [
h The image you captured appears in
the LCD monitor.
h Press [ ] or [ ] on the arrow button
to display the images stored before
or after the current image.
13
When you are finished, set the selec-
tor dial to [
camera.
HINT
i For still images, you can view the captured image on the LCD monitor by
keeping the shutter release button depressed when you capture the image.
i When the accessing indicator is flashing red or lit orange, the next image
cannot be captured. When the accessing indicator lights green again, it is
possible to capture the next image (see page 39).
].
] to turn off the digital
(Press halfway)
(Press fully)
Selector dial
LCD monitor
Arrow button
English
30