Samsung 9 SERIES User Manual page 22

Hide thumbs Also See for 9 SERIES:
Table of Contents

Advertisement

The remote control does not work.
Check if the power indicator on the TV blinks when you press the remote's On button. If it does
not, replace the remote control's batteries.
Make sure that the batteries are installed with their poles (+/–) in the correct direction.
Try pointing the remote directly at the TV from 1.5~1.8 m away.
If your TV came with a Remote Control (Bluetooth Remote), make sure to pair the remote to the
TV. (Please refer to the e-Manual.)
The cable or satellite box remote control doesn't turn the TV on or off
or adjust the volume.
Programme the cable or satellite box remote control to operate the TV. Refer to the cable or
satellite box user manual for the SAMSUNG TV code.
The TV settings are lost after 5 minutes.
The TV is in the Shop Mode. Change the Use Mode to Home Use. (
Expert Settings > Use Mode > Home Use).
Intermittent Wi-Fi
Make sure the TV has a network connection (
Make sure the Wifi password is entered correctly.
Check the distance between the TV and the Modem/Router. The distance should not exceed 50
ft (15.2 m).
Reduce interference by not using or turning off wireless devices. Also, verify that there are no
obstacles between the TV and the Modem/Router.
(The Wi-Fi strength can be decreased by appliances, cordless phones, stone walls/
fireplaces, etc.)
Single story
Contact your ISP and ask them to reset your network circuit to re-register the Mac addresses of
your new Modem/Router and the TV.
>
Settings > Network > Network Status).
Multi story
English - 22
>
Settings > System >
Wireless router
Wireless repeater

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents