Epson SureColor F7170 Setup Manual page 21

Attach the take-up reel to the stand using four C screws.
4.
Note: Leave the screws loose until the service engineer finishes adjusting the media system.
Connect the communication cable that is attached to the take-up reel system by running it through
5.
the horizontal struts to the back of the printer. Place the communication cable in the cable supports
and plug it in, making sure to tighten the screws on the plug to secure it in place.
Contact a service engineer to attach the Epson Genuine Ink Supply System and adjust the printer. Do
6.
not turn on the printer until the service engineer's work is complete.
Installing the Take-up Reel System |
21