Timer Recording - Panasonic DMR-BWT450 Operating Instructions Manual

Timer recording

• You can enter up to 32 programmes within a
month in advance. (Each daily, weekly or
series programme is counted as one
programme.)
• This operation only records to built-in HDD.
• This unit can record two programmes being
broadcasted at the same time.
Preparation
If you want to change the recording mode:
Press [REC MODE] and select the recording
mode, then press [OK].
1
Press [GUIDE].
TV Guide screen appears.
2
Select the programme, then press the
red button.
The timer icon "F" (red) is displayed.
• If on-screen instructions are displayed,
follow them.
• Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (
• The receipt of the TV Guide data via Set Top Box is not
possible.
• When timer recording from the external equipment, use
manual timer recording. (
• You can set the start and finish time to make the timer
recording work successfully. (
Buffer, Timer Record Stop Buffer)
31)
31)
70, 74, Timer Record Start
To use TV Guide system
Refer to "Using TV Guide system". (
Operation during Recording
Refer to "Operation during Recording". (
To edit the timer programme
Refer to "To confirm and edit a timer programme".
( 33)
If the screen for selecting single or series
timer recording appears
Select "Single Timer Rec." or "Series Timer Rec."
( 30), then press [OK].
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select "Timer Rec Edit", then press [OK].
3 Go to step 3 on page 31, "Manually
programming timer recording".
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select "Timer Rec Cancel", then press [OK].
("F" disappears.)
Recording
24)
28)
29
SQT0826