Warning Symbols; Electrical Safety - Black & Decker BDB530 Manual

• Do not place the inlet or outlet of the
vacuum near eyes or ears when
operating. Never blow debris in the
direction of bystanders.
• Keep all cooling air inlets clear of debris.
• To protect your feet and legs while
operating the appliance, always wear
heavy duty footwear and long trousers.
• Never allow children to use the
appliance.
• Wear protective goggles while operating.
• If operating an appliance in a damp
location is unavoidable, use a Residual
Current Device (RCD) with a tripping
current of not more than 30mA
protected supply. Use of an RCD reduces
the risk of electric shock.
• To prevent dust irritation the wearing of
a face mask is recommened.
• Disconnect the appliance from the mains
supply
- whenever you leave the machine;
- before cleaning a blockage;
- before checking, cleaning or working
on the appliance;
- if the appliance starts to vibrate
abnormally.
• Store the appliance only in a dry place.

Warning symbols

Do not use in the rain or leave
outdoors while it is raining.
Always wear eye protection.
(Original instructions)
Always wear ear protection.
Keep bystanders away.
Do not touch the fan.
Switch o : Remove plug from mains
before cleaning or maintenance
Labels on tool
The following symbols are shown on the
tool:
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
Position of Date Barcode
The Date Code which also includes the year
of manufacture, is printed into the housing.
Example:

Electrical safety

This tool is double insulated; therefore
no earth wire is required. Always
check that the power supply
corresponds to the voltage on the rating
plate.
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black and Decker Service centre
in order to avoid a hazard.
The extension cable must be suitable for
outdoor use and marked accordingly. Up to
0.75 mm² H05VV-F or H05RN-F extension
cable can be used without loss of product
performance.
ENGLISH
2014 XX JN
Year of manufacturing
5