Advertisement
3. Web Configuration
WNAP-7200 provides a user friendly interface for users to configure via web
browser. Please follow the below steps to configure WNAP-7200 basic settings.
1. It will take around 40 seconds to complete the boot up sequence after power on
from PoE.
2. Open
your
web
(http://192.168.0.1) into the "Address Field" of you web browser. Before
configuration, please make sure your PC's IP address is under the same IP range
with WNAP-7200, such as 192.168.0.x.
3. After entering, fill the default username/password (admin / admin) and then
you can see the home page.
browser
and
type
default
IP
address
of
WNAP-7200
Advertisement
