Map Share; About Map Share; Creating A Map Change Report - TomTom GO 40 User Manual

Map Share

About Map Share

You can report map changes using Map Share. These map changes are then shared with other
TomTom device users when they receive a map update.
There are two ways to report a map change:
Select a location on the map and create the change report immediately.

Mark a location and create the change report later.

Your map change reports are automatically sent to TomTom in
device to MyDrive Connect
All map changes are verified by TomTom. These verified changes are then available as part of the
next map update which you can get when you connect your device to
connection.
Tip: If a roadblock is reported using Map Share, the roadblock is verified and immediately shown
by TomTom Traffic.

Creating a map change report

Important: For safety reasons, do not enter the full details of a map change while you are driving.
You can always mark the location
To create a map change report, do the following:
1. Press and hold to select the location of the map change on the map view.
2. Select the pop-up menu button to open the menu.
3. Select Report Map Error from the pop-up menu.
4. Select the type of map change you want to apply.
using a USB connection.
and create the report later.
real time
MyDrive Connect
90
or when you connect your
using a USB